034Motorsport is proud to offer the ultimate front sway bar upgrade for the Audi & Volkswagen MQB chassis! The 034Motorsport Solid Front Sway Bar is made from high-quality spring steel and utilizes one-piece construction for maximum rigidity.
Engineered to further reduce body roll and enhance steering feel, the 034Motorsport Solid Front Sway Bar is the perfect upgrade for those seeking to positively affect turn-in feel and virtually eliminate lean under hard cornering.
Please Note: We highly recommend installing the 034Motorsport MQB Solid Adjustable Rear Sway Bar before upgrading the front. Fitting an upgraded front sway bar to a car with a factory rear sway bar will increase understeer and inhibit handling performance.
Please Note: For lowered vehicles, always check all clearances over the full articulation of the suspension in order to identify possible interference. We recommend running 034Motorsport suspension components, as they have been designed and tested to work together, without interference.
034Motorsport RS3 track use alignment specs; these specifications are optimal for a track driven car with a very "loose" handling attitude and lively rear end that drives towards oversteer. Caution should be used with these alignment specs as they can cause the car to over-rotate and spin, especially during throttle-lift conditions while turning:
Front: (Tires: 265/35-18 Michelin Sport Cup 2)
- Camber: -3.0 degrees each side (034-601-1013 camber mounts)
- Caster: 7.1 degrees (not adjustable)
- Toe: 0.6mm (toe-in) each side
Rear: (Tires: 245/40-18 Michelin Sport Cup 2)
- Camber: -1.5 degrees each side
- Toe: 0.8mm (toe-in) each side
- 2015 - Present Audi A3/S3/RS3 (8V - MQB)
- 2015 - Present Audi TT/TTS/TTRS (8S - MQB)
- 2015 - Present Volkswagen Golf/GTI/R (MkVII - MQB)